You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | PRIMELINE TOOLS GD 52212 Steel, Heavy Duty Short Stem Roller (2 Pack) This is a heavy-duty steel garage door roller with steel inner race. It features 10 ball bearings and a short stem. Same as the Prime-Line GD 52111 but this has a shorter stem. •Used to replace roller bearings on existing sectional garage doors •Short... ... more | go to store |
This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
This is a plain back tandem roller assembly with a 1/4-20 threaded mounting hole and two narrow mounting slots on the back end. These slots slide onto an opposite shaped extrusion on the door frame. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... ... more | go to store |
This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved Plastic ball bearing roller. It has a plain back housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20... ... more | go to store |
This is a plain back tandem roller assembly used by Armour Vue, Atlas and a variety of sliding patio door manufacturers. It has in-line tandem inner housing with two 1-1/2 in. concave steel ball bearing rollers set in a stamped steel housing with rear... ... more | go to store |
This is an extra heavy-duty plain back, tandem roller assembly used by Kawneer on their heavy doors. Often found in Hawaii used on door walls, it has an in-line tandem inner housing with 1-1/2 in. concave or grooved steel ball bearing rollers set in a... ... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
This is a unique tandem roller assembly with two 1-1/4 in. concave steel ball-bearing rollers installed. The square-shaped housing is 11/16 in. wide, 1-1/2 in. tall, and 4-1/2 in. long. It has an end adjustment screw and two mounting tabs at each end... ... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The adjustable... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
Ads related to Prime-Line 1-1/4 in. Steel Ball Bearing Tandem Roller Assembly, Plain Back Single Pack in Brown | 7.44 H x 3.82 W x 1.13 D in | Wayfair D 1983