Power Tools › Irwin › bosch 3 8 high speed

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin Hanson HAN90188 High Speed Steel 1/2-Inch Reduced Shank 6-Inch Long 1-3/8-Inch Silver and Deming Drill

High Speed Steel 1/2 Reduced Shank 6 Long 1-3/8 Silver and Deming Drill Bit Features and Benefits: ? Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications ? Three-flatted shank design provides... more

Irwin 3/8 in. X 6 in. L High Speed Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Irwin 326011 Percussion Masonry Drill Bit 3/8

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

Irwin Turbomax 21/64 in. X 4-5/8 in. L High Speed Steel Drill Bit 1 pc

IRWIN Turbomax High Speed Steel Straight Shank Jobber Length Drill Bits features revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits more

Hanson 21/64 TURBOMAX DRILL BIT CARDED

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more

Irwin Tools 10231 Unibit 13-Hole High Speed Step Drill 1/8 To 1/2 Each

Irwin 10231 Unibit #1 13-Step 1/4-Inch Step Drill Bit 1/32-inch Steps (1/8- to 1/2- inches) Save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size.... more

Irwin Unibit 1/8 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

IRWIN INDUSTRIAL Tool 12413 3/4 High Speed Steel Countersink Bit

3/4 High Speed Steel Countersink Drill Bit Tip Is Milled & Precision Ground To 82 Degrees For Countersinking Into Most Machin able Materials Engineered With Premium High Speed Steel With Black Oxide Coating For Corrosion Resistance Features 5 Flutes... more

2Pc Irwin 3/16 in. X 6 in. L High Speed Steel Split Point Drill Bit 1 pc

IRWIN 6 Aircraft Extension High Speed Steel Fractional Straight Shank Drill Bits are Ideal for drilling in hard-to-reach areas and for running wires and cable more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Irwin 3041002 Speedbor Max Speed Bit ~ 5/8

SPEEDBOR MAX SPADE BIT1/4 hex shank size with 6 shank lengthTri-flute design for faster chip ejectionCutting spurs have 3 cutting edgesFull screw tip allows bit to self feedGrooved hex shank prevents slipping in drillFits all standard 1/4 quick change... more

Hanson HSDR12A/CD 3/8

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

Hanson HS DR CD 3/8

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 3-1/8 more

Irwin Speedhammer Plus 3/4 in. Dia. x 8 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin Speedhammer Plus 3/8 in. Dia. x 12 in. L Steel Drill Bit 1/4 in. SDS-Plus Shank 1 pc.

IRWIN hammer drill bits incorporate a patented new flute design that removes dust more efficiently for faster drilling and longer bit life. The carbide tip design also patented by IRWIN offers the optimum combination of speed and centering for more... more

Irwin 43906 3/8 Plug Cutter

The Irwin Tools 43910- 5/8 Plug Cutter is recommended for making wooden plugs for covering fastener holes in furniture cabinetry floors decks and other woodworking projects. It is constructed of hardened high-carbon steel for added strength and durability more

Irwin Tools 43906 3/8 Plug Cutter

3/8 Diameter 1/4 Shank Size Plug Cutter Recommended For Covering Fastener Holes In Furniture Cabinetry Floors Decks & Other Woodworking Projects Constructed Of Hardened High Carbon Steel For Added Strength & Durability Ideal For Making Dowels Carded.... more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

Irwin Speedbor 1-1/8 in. Dia. x 5 in. L Hardened Steel Hole Cutter 1 pc.

The Irwin Speedbor maximum speed wood drilling bit is the fastest Speedbor ever. The speed tip features a full screw-point that allows bit to self-feed as well as three (3) cutting spurs for faster cleaner holes less breakout and extended drilling... more

Irwin 1866036 Wood Speedbor Max Drill Bit 7/8 x 4

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed as well as three 3 cutting spurs for faster cleaner holes less breakout and extended drilling life. The... more

Hanson 5/8 COUNTERSINK

Features and Benefits: Precision ground 82 degree tip for countersinking most machinable metals wood or plastic Made from industrial grade high speed steel for increased durability Includes a black oxide finish for added corrosion resistance Five flute... more

IRWIN INDUSTRIAL TOOL 12412 Countersink 5/8

High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces vibration for smoother drilling. Precision-ground 82 deg Degree tip for countersinking into most Machin able metals. 1/4 Round shank compatible with all hand... more

Irwin 3041005 Speedbor Max 7/8-Inch by 6-Inch Self Feeding Spade Bit

The IRWIN SPEEDBOR MAX Speed Standard-Length Drill Bit utilizes a tapered tri-flute design that allows for faster chip ejection and less binding. The drill bits have cutting spurs with 3 cutting edges for added durability and also feature a full screw... more

Hanson BIT DRI 3/32 TURBOMAX CARDED 2 PCK

Features and Benefits: Revolutionary tip design stays sharper longer and drills up to 10 times faster than other leading drill bits High speed steel features a black body and gold flute Self-centering Turbomax tip for clean entry and fast starts; stays... more

HAN91140

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

Hanson BIT DRI 1 REDUCED SHANK

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

17/32 REDUCED SHANK

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

Hanson BIT DRI 7/64 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more

IRWIN UNIBIT 4 Unibit #4 Step Drill Bit, 12 Hole Sizes, 3/16 to 7/8 in, 1/16 in

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 7/8 in Size Range, Straight with Three Flats, 3/8 in Shank Diameter, 2 7/8 in Overall Length, Maximum Drilling Depth 1/8 in more